The VTX A8 SB accessory is a lightweight suspension bar that can be used as an array frame or to implement pull-back of a VTX A8 or B18 array. When used for pull-back, the VTX A8 SB can be attached to the bottom cabinet of an array and connected to a rear suspension point to allow for extra down-tilt, otherwise not possible using the VTX A8 AF alone. The VTX A8 SB can also attach to the top cabinet of an array and be used as a compact array frame. In this mode, the suspension bar connects to the top cabinet’s rear rigging points and the down-tilt angle is controlled by the number of cabinets and array geometry. JBL’s Line Array Calculator software application is used to calculate the down-tilt angle. For dual-point applications and added aiming flexibility, two VTX A8 SB suspension bars can be used: one at the top and one at the bottom of the array. The VTX A8 SB can support the weight of up to 24 x VTX A8 or 16 x VTX B18 enclosures (depending on array geometry) and a 5/8” shackle (included) can be attached directly to the bar. For more information about the suspension bar and use cases, refer to the VTX A8 Rigging Manual.
In-Store: No*Products marked as only online might be sent direct from the supplier.